Digi SM-5300 - Page 54

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 53
OPERATION
DISPLAY
4.
Touch [GROUP] area to browse the existing
Group Number
5.
Then touch desired group number
(e.g. 1)
Note: Also allow to just Enter the Group number
from 1 to 10 by the keypad without need
to browse.
6.
Touch [NAME] key.
7.
[NAME] key function to enter the Group
Name or to change the Group Name by
touching desired characters keys (e.g. Group
One).
Then touch [ENTER] key.
Note: When you change the Group Name in
[GROUP] key, [CURRENT PRESET
GROUP] key follow to change the Group
Name.