Digi SM-5300 - MAC Address and VNC Password Setup

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 56
OPERATION
DISPLAY
4.
Method 2: Assign by browsing the existing
PLU Data.
Touch [PLU] area to browse the existing
PLU Data.
Note:
1. Touch or key for more
selection.
2. Active [ALL] button to show all PLUs or
[SEARCH] button to search desired PLU
5.
Touch the desired PLU key.
Or entry PLU number by keypad then touch
[ENTER] key (e.g. PLU 3)
6.
Touch the desired preset key.
(e.g. Row #1, Column #2)
7.
Press [X] key at keypad to exit to keys
selection mode or touch [BACK] key on
display
Note: Touch [MENU] key to exit to the
Programming Mode.