Digi SM-5300

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 61
OPERATION
DISPLAY
4.
Method 1: Assign by entering the existing
Department Number by using the keypad.
Enter the Department Number by the
keypad.
(e.g. 3)
Touch the desired preset key.
(e.g. Row #3, Column #1)
5.
Method 2: Assign by browsing the existing
Department Data.
Touch [DEPT] area to browse the existing
Department Data.
Note: Touch or key for more selection.
6.
Touch the desired Department key.
Or entry Department number by keypad
then touch [ENTER] key (e.g. 10)
Touch the desired preset key.
(e.g. Row #2, Column #5)
7.
Press [X] key at keypad to exit to keys
selection mode.
Note: Touch [MENU] key to exit to the
Programming Mode.