Digi SM-5300 Operation Manual

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 62
3.4.1.5 Group Assignment
Group can be assigned to a preset key to view or select the preset key under the Group
Number by pressing the assigned preset key in Registration Mode. There are two methods to
assign Group on preset key.
Note: Non-existing Group Number cannot be assigned.
OPERATION
DISPLAY
1.
Menu Mode ~> Programming ~> Preset key
In Preset Key Programming, Enter group
number (e.g. 0)
Note: adjust Primary keys, Secondary keys and
Accumulation keys to desired display size
2.
Touch [PRIMARY KEYS] key.
3.
Touch [PLU] key select the word GROUP
display on the key.
Note: [DATA TYPE] key will toggle for the
following selection, PLU, FUNCTION,
DEPT, GROUP, CLERK, MG,
TRACEABILITY, TARE, TAX,
FLEXKEY_FUNC, SURCHARGE, LABEL
FORMAT, KEYPAD KEY, TEXT, IMAGE
and COLOR

Digi SM-5300 Specifications

General

Brand	Digi
Model	SM-5300
Category	Scales
Language	English