–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 63
Method 1: Assign by entering the existing
Group Number by using the keypad.
Enter the Group Number by the keypad.
(e.g. 10)
Touch the desired preset key.
(e.g. Row #2, Column #1)
Method 2: Assign by browsing the existing
Group Data.
Touch [GROUP] area to browse the
existing Group Data.
Note: Touch or key for more selection.
Touch the desired Group key. (e.g. Group
6)
Touch the desired preset key.
(e.g. Row #3, Column #3)
Note: touch NEXT button go to Page 2
Press [X] key at keypad to exit to keys
selection mode.
Note: Touch [MENU] key to exit to the
Programming Mode.
To Next Page
Loading...
