–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 64
3.4.1.6 Clerk Assignment
Clerk key is used to accumulate the sales data of the operator that has been assigned for the
Clerk key. There are 4 default Clerk keys (9995 [+A] key, 9996 [+B] key, 9997 [+C] key &
9998 [+D] key). If you want to use other Clerk keys, you need to program the Clerk key and
assign on preset keys in advance. There are two methods to assign PLU on preset key.
Note: Non-existing Clerk Number cannot be assigned.
Menu Mode ~> Programming ~> Preset key
In Preset Key Programming, Enter group
number (e.g. 0)
Note: Adjust Primary keys, Secondary keys and
Accumulation keys to desired display size
Touch [PRIMARY KEYS] key.
Touch [PLU] key select the word CLERK
display on the key.
Note: [DATA TYPE] key will toggle for the
following selection, PLU, FUNCTION,
DEPT, GROUP, CLERK, MG,
TRACEABILITY, TARE, TAX,
FLEXKEY_FUNC, SURCHARGE, LABEL
FORMAT, KEYPAD KEY, TEXT, IMAGE
and COLOR
To Next Page
Loading...
Need help?
General
