Digi SM-5300 Operation Manual

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 68
3.4.1.8 Traceability Assignment
Traceability can be assigned to a preset key to call up traceability data by pressing the
assigned preset key in Registration Mode. There are two methods to assign Traceability on
preset key.
Note: Non-existing Traceability Number cannot be assigned.
OPERATION
DISPLAY
1.
Menu Mode ~> Programming ~> Preset key
In Preset Key Programming, Enter group
number (e.g. 0)
Note: adjust Primary keys, Secondary keys and
Accumulation keys to desired display size
2.
Touch [PRIMARY KEYS] key.
3.
Touch [PLU] key and select
TRACEABILITY on list display.
Note: [DATA TYPE] key will toggle for the
following selection, PLU, FUNCTION,
DEPT, GROUP, CLERK, MG,
TRACEABILITY, TARE, TAX,
FLEXKEY_FUNC, SURCHARGE, LABEL
FORMAT, KEYPAD KEY, TEXT, IMAGE
and COLOR

Digi SM-5300 Specifications

General

Brand	Digi
Model	SM-5300
Category	Scales
Language	English