Digi SM-5300 - Page 68

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 67
OPERATION
DISPLAY
4.
Method 1: Assign by entering the existing
Main Group Number by using the keypad.
Enter the Main Group Number by the keypad.
(e.g. 4)
Touch the desired preset key.
(e.g. Row #3, Column #5, page 2)
5.
Method 2: Assign by browsing the existing
Main Group Data.
Touch [MAIN GROUP] area to browse the
existing Main Group Data.
Note: Touch or key for more selection.
6.
Touch the desired Main Group key. (e.g. 6).
Or entry Main Group number by keypad then
touch [ENTER] key
Touch the desired preset key.
(e.g. Row #2, Column #2, page 2)
7.
Press [X] key at keypad to exit to keys
selection mode.
Note: Touch [MENU] key to exit to the
Programming Mode.