–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 66
3.4.1.7 Main Group Assignment
Main Group can be assigned to a preset key to call up Main Group data by pressing the
assigned preset key in Registration Mode. There are two methods to assign Main Group on
preset key.
Note: Non-existing Main Group Number cannot be assigned.
Menu Mode ~> Programming ~> Preset key
In Preset Key Programming, Enter group
number (e.g. 0)
Note: adjust Primary keys, Secondary keys and
Accumulation keys to desired display size
Touch [PRIMARY KEYS] key.
Touch [PLU] key until the word MG display
on the key.
Note: [DATA TYPE] key will toggle for the
following selection, PLU, FUNCTION,
DEPT, GROUP, CLERK, MG,
TRACEABILITY, TARE, TAX,
FLEXKEY_FUNC, SURCHARGE, LABEL
FORMAT, KEYPAD KEY, TEXT, IMAGE
and COLOR
To Next Page
Loading...
