Digi SM-5300 - Page 78

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 77
OPERATION
DISPLAY
5.
Method 2: Assign by browsing the existing
Label Format Data.
Touch [LABEL FORMAT] area to browse
the existing Main Group Data.
Note: Touch or key for more selection.
6.
Touch the desired Label Format key. (e.g.
2).
Touch the desired preset key.
(e.g. Row #1, Column #4)
7.
Press [X] key at keypad to exit to keys
selection mode.
Note: Touch [MENU] key to exit to the
Programming Mode.