Digi SM-5300 - Page 77

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 76
3.4.1.12 Label Format Assignment
Label Format can be assigned to a preset key for change label format data by pressing the
assigned preset key in Registration Mode.
OPERATION
DISPLAY
1.
Menu Mode ~> Programming ~> Preset key.
In Preset Key Programming, Enter group
number (e. g. 0).
Note: Adjust Primary keys, Secondary keys and
Accumulation keys to desired display size.
2.
Touch [PRIMARY KEYS] key.
3.
Touch [PLU] key until the word LABEL
FORMAT display on the key.
Note: [DATA TYPE] key will toggle for the
following selection, PLU, FUNCTION,
DEPT, GROUP, CLERK, MG,
TRACEABILITY, TARE, TAX,
FLEXKEY_FUNC, SURCHARGE, LABEL
FORMAT, KEYPAD KEY, TEXT, IMAGE
and COLOR
4.
Method 1: Assign by entering the existing
Label Format Number by using the keypad.
Enter the Label Format Number by the
keypad.
(e.g. 1)
Touch the desired preset key.
(e.g. Row #3, Column #5)