Digi SM-5300 - Page 84

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 83
OPERATION
DISPLAY
5.
Assign the color to preset key e.g.
SURCHARGE Key. The preset key colors will
change.
Note: [CLEAR COLOR] key purpose to clear
color selection and if assign to preset
key, it will change the color key to
default color
6.
Press [X] key at keypad to exit to keys
selection mode.
Note: Touch [MENU] key to exit to the
Programming Mode.