Digi SM-5300 - Page 86

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 85
OPERATION
DISPLAY
4.
Method 2: Assign by browsing the existing
PLU Data.
Touch [PLU] area to browse the existing
PLU Data.
5.
Touch the desired PLU key. (e.g. PLU 4 –
MANGO)
Or entry PLU number by keypad then touch
[ENTER] key
Touch the desired preset key.
6.
Touch [PLU] key select the word
FUNCTION display on the key.
Note: [DATA TYPE] key will toggle for the
following selection, PLU, FUNCTION,
DEPT, GROUP, CLERK, MG,
TRACEABILITY, TARE, TAX,
FLEXKEY_FUNC, SURCHARGE, LABEL
FORMAT, KEYPAD KEY, TEXT, IMAGE
and COLOR
7.
Method 1: Assign by entering the existing
Function Number by using the keypad.
Enter the Function Number by the keypad.
(e.g. 215 for ORDER RETRIEVE)
Touch the desired preset key.