All rights reserved Digi International Inc. 91004331 91004329 A2/318
Equipment Specifications
SmartSense Z Sensor
The SmartSense Z Sensor allows companies to efficiently monitor real-time temperature. So
you can take corrective action when it is needed and report on sensor readings, all in one
place, for regulatory compliance and quality control. A patented product temperature
simulator enables you to track actual product temperatures. The system deploys in minutes
and fully automates temperature monitoring of fridges, freezers, and equipment.
SmartSense Z Sensors Paperless Monitoring System
Features
• Quickly deploy in your fridges, freezers, walk-ins, and makelines.
• Designed for multi-site operations where security, deployability, and reliability are critical to
success.
• Sensors automatically connect to your SmartSense Gateway to provide a selfprovisioning
installation process. Centralized configuration is provided through the SmartSense dashboard.
Specifications
Wireless 2.4 Ghz
Dimensions H: 1.1”, W: 3.3”, L: 6.62”
Sensor Accuracy ±0.9°F (±0.5°C) 0.1°
Resolution Built-in Sensor Range -40 to 140°F (-40 to 60°C)
External Sensor Range -328 to 392°F (-200 to 200°C)
Expansion Ports 2 ports for external sensors, e.g. power, tank level, humidity
Environmental IP 67
Wireless Range Up to 1,000’
Display (optional) Wireless high-contrast display with audible/visual alarm
Sensors per Gateway Up to 24 wireless sensors connect to each gateway
Power Source 2 replaceable AA batteries
Battery Life Up to 2.5- 5 years, data frequency dependent
Security 128 bit AES encryption Certificate based authentication
To Next Page
Loading...
