Revision history—90001543
Revision Date Description
J October
2018
Added Brazilian certifications.
K March
2019
Added BLE power output specifications. Added I2C pin specifications. Added a
new antenna. Added XBee3 USB Adapter information.
L April 2019 Added XBIB-C board information.
M May 2019 Added FCC publication 996369 related information.
N December
2019
Added antennas.
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United
States and other countries worldwide. All other trademarks mentioned in this document are the
property of their respective owners.
© 2019 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document “as is,” without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
www.digi.com/howtobuy/terms
Customer support
Gather support information: Before contacting Digi technical support for help, gather the following
information:
Product name and model
Product serial number (s)
Firmware version
Operating system/browser (if applicable)
Logs (from time of reported issue)
Trace (if possible)
Digi XBee® 3 RF Module Hardware Reference Manual
2
To Next Page
Loading...
Need help?
General
