2 Instruments
2.1 Altimeters
A2 A3
2.2 Variometers
2.2.1 Intellivario
Digifly
svar
2.2.2 Analog Vario
2.2.3 Integrator Vario
integ
3 barometric altimeters are shown alternatively on the first digital
indicator at the top of the screen by pressing the key. In order to
reset to zero the displayed altimeter (only and ) press
Revolutionary system designed by based on use of a
digital circuit. This a noise-free vario with a
very high sensitivity (adjustable with the parameter n.4 in the
setup submenu ).
Indicates the instantaneous value of the vertical speed. It is displayed
on the analog bar to the left of the screen.
Indicates the integrated value (average) of the vertical speed. It is
displayed on the second numerical display from the top of the screen
when the symbol appears. To set up the time of integration, edit
sophisticated produces
with a long pressure the key.
The adjustment of the 3 altimeters is possible in the “ " submenu.
Parameters ALT1, ALT2, ALT3 are used to set the value of the 3
altimeters in mt or ft.
Parameters PRS1, PRS2, PRS3 are used to set the reference pressure of
the 3 altimeters in millibars.
alti
“alti”
In order to set all the altimeters on the 1013.2 mb standard reference
pressure: press then , word is displayed , then press and
hold pressed the key until hearing a triple sound.
and
Page 4
To Next Page
Loading...
Need help?
General
