When the “totale gain of altitude” is visualized the unit of measure
icon “ ” over the number flashes. This instrument is always
represented in tens of meters or tens of feet.
- The second numerical display visualizes the minimum and
maximum value of the analog vario.
- The third numerical display the minimum and maximum value of
the air speed “ ”.
In order to alternatively visualize the minimums and maximums
values press the key.
- The fourth numerical display visualizes the progressive number of
the selected flight, in order to select a different flight press
keys, a higher number indicates a more recent flight.
- The fifth multifunction display shows alternatively: duration of the
flight and flight takeoff time; in order to choose between the three
functions press the key.
The date is displayed in the “day month” format , the duration of the
flight ( ) in “hours:minutes” and takeoff time ( ) in
“hours:minutes”.
The memory of the recorder contains last 100 recorded flights.
In order to delete all recorded flights :
press then twice, the word is displayed , then press and
hold pressed the key until hearing a triple sound.
With the VL100 and PC switched off, connect your flight instrument to
your PC via the “PC CABLE” or the “FlashPro100” unit. Turn on the PC
and the Vl100 , select the menu “LINK” in the Vl100 .
The VL100 is now connected to your PC and ready to accept
commands from your Pc Software. ( visit www.digifly.com for more
mt/ft
ias
chrono Time
“peak”
or
and
5 PC-LINK
Page 8
To Next Page
Loading...
Need help?
General
