What to do
The Led indicator
does not glow
Mains cable is
not connected
Check if the main cable is not
plugged into the power socket.
No picture or sound No signal or weak signal.
Check the Aerial and scart
connections
The settings you have made
in the menus have not been
changed.
The digital set-top box was
unplugged without first
going to standby.
Before unplugging your digital set-
top box, make sure it is in standby
The remote control is not
working.
The digital set-top box is in
Stand by.
Remote control is
incorrectly aimed.
Battery exhausted.
Press the standby key.
Check if anything is obstructing the
front panel .
Change the batteries
Password forgotten.
Take contact with the nearest
service center.
Record does not start.
No or weak Aerial 2 input
Signal.
Check Aerial 2 input connection.
No PIP video.
No or weak Aerial 2 input
Signal.
PIP Channel is radio or
teletext based.
Check Aerial 2 input connection.
Use PIP+ / PIP- to choose a valid
TV channel.
To Next Page
Loading...