To Next PageTo Next Page
Need help?Do you have a question about the Digikeijs DR4018 DIGISWITCH and is the answer not in the manual?
General| Manufacturer | Digikeijs |
|---|---|
| Product Name | DR4018 DIGISWITCH |
| Category | Switch |
| Number of Outputs | 8 |
| Output Current | 1A per output |
| Communication Interface | DCC |
| Protocol | DCC |
| DCC Protocol | NMRA DCC |
| Control Method | DCC |
| Configuration | CV Programming |
| Suitable for | Lights |
| Mounting | DIN Rail |
Overview of the DR4018 DIGISWITCH switching decoder and its capabilities.
Steps to assign a unique address to the DR4018 module for control unit communication.
Procedure to reset the DR4018 decoder to its default factory settings using POM.
Method for changing decoder settings using a dedicated programming track and resistor.
Alternative method to change decoder settings directly on the main track without a separate programming track.
Explanation of available presets for configuring the DR4018's output functions.
How signal numbers are coupled to output groups for advanced control.
Configuring the pulse duration for outputs 1 through 16.
Details on how signal combinations determine specific aspects and dimming.
