The padlock hasp must be removed
Removal of Padlock Hasp
Example 1
Close the door and mark the area to
cut the padlock hasp.
Open the door then cut the padlock
hasp on the marked cut-line.
Smooth out rough or sharp edges.
Close the door and make sure that
nothing is protruding above the
surface of the door.
1 - Metal File1 - Handheld Grinder or Hack Saw
IG-NXT-U-DEN
121715
707 766 6000 | sales@digilock.com | www.digilock.com
To Next Page
Loading...
