DG-WA3000N User Manual
44
Here is the description of every setup item:
Parameter Description
No. Except Main SSID, you can configure additional three
ESSID here.
Enable Select the box to enable the different additional ESSID.
SSID Please input the SSID name (the name used to identify this
wireless Access Point) here. You can input up to 32
alphanumerical characters. PLEASE NOTE THAT
ESSID IS CASE SENSITIVE.
Broadcast SSID Decides if the wireless Access Point will broadcast its own
ESSID or not. You can hide the ESSID of your wireless
Access Point (set the option to ‘Disable’), so only those
people who know the ESSID of your wireless Access Point
can get connected.
WMM WMM (Wi-Fi Multimedia) technology, which can improve
the performance of certain network applications, like
audio/video streaming, network telephony (VoIP), and
others. When you enable WMM function, the Access Point
will define the priority of different kinds of data, to give
higher priority to applications which require instant
responding. Therefore you can improve the performance of
such network applications.
VLAN ID
(0:Untagged)
If your network uses VLANs, you can assign the SSID to a
VLAN on your network. Client devices that are associated
using the SSID are grouped into this VLAN. The VLAN ID
range is from 1 to 4094. The VLAN ID is 0 by default, it
means disable the VLAN function for the ESSID.
To Next Page
