DG-WA3000N User Manual
72
Here is the description of every setup item:
Parameter Description
WPA Unicast Cipher
Suite
You can select WPA encryption type here. AES is safer than
TKIP, but not every wireless client supports it. Please refer
to the specification of your wireless client to decide which
encryption type you should use.
Use internal
MD5/PEAP RADIUS
Server
Uses built-in RADIUS Server (refer to Section 2-8) instead
of external RADIUS server. If you check this box, the value
in following three fields will be ignored.
RADIUS Server IP
address
Please input the IP address of RADIUS authentication
server here.
RADIUS Server Port Please input the port number of RADIUS authentication
server here. Default value is 1812.
RADIUS Server
Password
Please input the password of RADIUS authentication server
here.
After you finish with setting, please click ‘Apply’, and the following message will
be displayed:
When you see this message, the settings you made are successfully saved. You can
click on ‘Continue’ button to go back to previous page and continue with other
settings, or click ‘Apply’ button to restart the wireless Access Point and the changes
will take effect after about 30 seconds.
To Next Page
