4
TECHNICAL SPECIFICATIONS
Power supply: 230Vac ± 15%, frequency 50 or 60 Hz
Output voltage: from 50 to 220Vca (with power supply 230Vca)
Output compensation: compensation of power supply variations
Output frequency: from 3,0 to 199,9 Hz in step of 0,1 Hz
Current: maximum current 12 Amperes peak (about 5 Arms) limited
from a circuit with autoreset
Fuses: 6,3 A fast action 250Vac; dimensions 5x20
Voltage output: soft-start with ramp of about 0,5 seconds
Remote commands: start/stop with external voltage PNP
(15 ÷ 30 Vdc, current 10 mA) optocoupler
external potentiometer see page 9
voltage reference 0 ÷ 5 Vdc see page 9
current reference 0 ÷ 20 mA see page 9
start/stop NPN see page 9
Mechanical protection: IP 20
EMI Protection: meets following regulations: LVD CEI EN60439-1
EMC CEI EN50082-2
EMC CEI EN50081-2
If observed wiring instructions.
Dimensions: 255 x 120 x 76 mm (height, breadth, depth)
(20 - 30mm must be provided in low side for connector
insertion)
Weight: 1,4 Kg
Downloaded from StockCheck.com
To Next Page
Loading...
