Digital Check ReceiptNOWTM Elite User Manual
- 10 -
before printing.
4.5.2 Install/Change Paper Roll
1) Pull the handle and open front cover.
2) Using the paper width adjustment wheel, adjust to fit the width of the paper being installed, as shown
below. Roll the adjustment wheel towards the rear of the unit to adjust for wider rolls. Roll the
adjustment wheel towards the front of the unit to adjust for narrower rolls. After the paper roll is installed,
it should rotate freely.
3) Put paper roll into printer according to directions shown on the label.
4) Pull out paper end and close front cover.
To Next Page
Loading...
Need help?
General