Digital Check ReceiptNOW Elite User Manual

Digital Check ReceiptNOWTM Elite User Manual
- 5 -
2.2 Cutter Technical Specifications
Item
Parameter
Note
Cutting method
Sliding blade
Cutting time
500ms
Cutter cuts for one time.
Cutting interval
2s
30 cuts / min (maximum)
Type of paper 0.06~0.1mm
thermal paper or equivalent thickness
paper
Operating voltage
24VDC
Maximum operating current
1.2A
24VDC
Cutter lifetime
1.5 million times (0.06mm
thick paper)
*Includes full-cut, partial cut
Full cut: Completely severs paper
Partial cut: Partially severs paper, leaves cut end attached with tear-off tab
2.3 Printing Consumable Material Technical Specifications
2.3.1 Thermal Paper Parameters
 Type of Paper: Continuous thermal paper
 Paper Feeding Method: Paper Roll
 Paper Width: Maximum 80mm, width can be adjusted between 56-82.5mm
 Paper Thickness: 0.06mm-0.1mm
 Thermal Layer: External
 Paper Roll Size: OD (Max)： 83 mm
 Inside Diameter (Min) 12.5mm
 Recommended Paper：
Part Number Manufacturer
401095994 Digital Check
F240AC,F220-VP,FV230A1,
PA220AG,HP220A
Mitsubishi Paper Mill CO., LTD
FD210,PD150R,PD160R OJI Paper CO., LTD.
F70NA FUJI PHOTO FILM CO., LTD
Attention：
 Please use recommended paper or equivalent quality paper. The use of other types of paper may
affect print quality and print head life.
 If the paper is contaminated by chemicals or oil, the paper may become discolored or printing
result may not be clear.
 Do not scratch the thermal paper with any sharp or hard object. This may cause the printing to be
obscured or unclear.
 All thermal printer paper will degrade and produce poor quality printing if exposed to temperatures
greater than 70°C (158°F), high humidity or strong light. Store thermal printer paper in a cool, dry
place and in its original wrapping until ready for use.

Digital Check ReceiptNOW Elite Specifications

General

Brand	Digital Check
Model	ReceiptNOW Elite
Category	Printer
Language	English