[10]
Administrator for more information.
If DHCP is selected, the IP address will automatically adjust to match the network’s requirements.
You may manually change the IP address as needed (Network Type must be set to Static).
Subnet Mask address classifies the subnet that the system belongs to. Contact your Network
Administrator for more information.
This is the IP address of the router or gateway server. It is required when connecting to the module
through the external router over the internet (from another network). Contact your Network
Administrator for more information.
Enter the IP address of the Domain Name Server. You should input the DNS Server information to
use DDNS, E-mail notifications and NTP Server. Contact your Network Administrator for more
information.
Input the port number to use when connecting from the Web Browser. The default is 80. Contact
your Network Administrator for more information.
Displays the system’s IP address.
Use UPnP (Universal Plug and Play)
UPnP is a plug-and-play feature that allows the module to be automatically discovered by a PC on
the same network. To locate the module, go to “My Network” on your PC. The computer will scan
your network for all supported devices. The first five characters of the file name of a detected
module represent the model number, followed by the module’s IP address
Once the PC discovered the module, double click on the icon to open the module’s web client.
Enter your User ID and Password to login and click ‘Connect’ to connect.
To Next Page
Loading...