[15]
1. Click the delete ( ) button for deleting each DVR/NVR or camera.
2. Click the DELETE PAGE for deleting devices on the same page and click the DELETE ALL for
deleting all devices.
The live image can be seen by easy button operation after power-up. The images can be seen in 1, 4, 9
and 16 screen splits (some split options may not be available according to the module’s number of
channels). Whenever the screen display mode button ( ) on the toolbar is clicked, the
screen will change to display the next channel or sequence of channels.
To switch from a multi-channel view to a single camera, click on the selected channel. To return to the
previous screen mode, click on the left mouse button again.
“VIDEO LOSS” is shown on the display screen when no camera is connected or disconnects suddenly.
When a camera is disconnected, a warning sound shall be generated depending on the system setting.
Admin users can set different levels of authorization for each user, granting them specific access to
specific channels. If a certain user is not authorized to view a channel, no image is shown on the display
screen as below.
To Next Page
Loading...