[14]
2. Select channel number to register.
3. Input necessary information with button and click the GET INFO button to get streams
information.
4. Select the channel to register.
5. Click the APPLY button to register DVR/NVR.
If a user wants to connect to an IP camera in a different network, the cameras can be added
manually using the ADD CAMERAS MANUALLY button.
1. Click the ADD CAMERAS MANUALLY button to open the camera property window.
2. Select channel number to register.
3. Select protocol (ONVIF, RTSP, FOCUS and VHT) of the camera. Registration is available with
one of the following. – IP Address, RTSP URL or ONVIF URL
4. Input necessary information with button and click the GET STREAM button to get streams
information.
5. Click the APPLY button to register the camera.
Adding a recorder or camera using RTSP
1. Click on the ADD CAMERAS MANUALLY button.
2. Enter the DVR’s user ID and password.
3. Select which channel you want to add to the Spot Monitoring Module.
4. Under Protocol, select RTSP instead of ONVIF (default).
5. Enter the DVR’s model and brand names (optional).
6. Enter the DVR’s RTSP URL in the first RTSP field.
a. To add DW’s VMAX® A1™ DVR, the RTSP URL should be as follow:
rtsp://xxx.xxx.xxx.xxx:port/rtsp/unicast/live/profile-x
For example: rtsp://192.168.1.100:80/rtsp/unicast/live/profile-1
7. Enter the device’s IP address: xxx.xxx.xxx.xxx.
8. Port: Use the device’s web port (default value is 80).
9. Profile-x: Enter the channel number you want to add.
10. Press the APPLY button to save changes.
To Next Page
Loading...