[30]
Use can use either a public DDNS server or the DDNS server operated by module maker
(dynlink.net) to connect through dynamic IP.
Digital Watchdog® offers free and reliable DDNS service support. This allows you to assign the
module a URL address rather than a long, complicated IP Address. This simplified the connection
process to the module. The DDNS service is supported by Digital Watchdog® and is free of charge
for our customers. To setup DDNS
Input necessary information based on your network environment. And then click the SAVE button.
• Enable Use DDNS box
• DDNS SERVER: Select DYNLINK.NET or MYDWDDNS.NET
• TCP/IP PORT: Default is 80.
• HOSTNAME: Assign a domain name for your module (ex, module office). If the same domain
name is assigned, the message still pops up when you click the CHECK button. The hostname
can be automatically assigned by clicking the AUTO GENERATE button.
IP Mapping and External IP
If you are using IP Mapping and Port Forwarding (e.g. using the router for internet connection),
enable both [Use Device IP Mapping] and [Use External IP] for proper connection.
Setting at the Remote Software (CMS)
In the menu Option > Setting, input DDNS Address and Port number.
The address of the DDNS SERVER is “dynlink.net” and Port is “80”.
Setting at the Web Browser
Users can type the module’s mac address + dynlink.net.
In case you are using a subdomain name, type the domain name + dynlink.net
Ex) 1. If Mac address is “00:1C:84:01:00:02” input as “http://001c84010002.dynlink.net”
2. If the domain name is “DVROFFICE” input as “HTTP:// DVROFFICE.dynlink.net”
To Next Page
Loading...