[8]
In live view, move the mouse cursor to the bottom of the screen to show the menu bar.
Click on the menu button to access the module’s main menu screen. See “4. Setting” for details.
Select the display split mode from the available options. Select 1CH, 4CH, 9CH or 16CH mode.
Start/stop the sequence mode in live mode. The sequence is disabled if all channels are displayed.
Switch to a single-channel view of a specific channel by pressing the corresponding number.
Exit the module with three different options: Log Off, Reboot and Shutdown.
When selected, the menu bar will be fixed on the screen permanently, regardless of the mouse’s
position.
To Next Page
Loading...