digitalview HE-1400 - User Manual

1
HARSH ENVIRONMENT
PC, DVI INTERFACE CONTROLLER
FOR TFT PANEL
Model: HE-1400
Part number : 41710013X-3
INSTRUCTIONS
CONTENTS
Page: 2. Introduction, How to Proceed, Usage Note, Disclaimer
2. System design – Diagram of a suggested system
3. Assembly notes – Important information about system elements
5. Connection & Operation – How to use the controller
8. Connectors, pinouts & jumpers – Essential connection information
16. Controller dimensions
17. Application notes
19. Troubleshooting
20. Specifications
21. Appendix I – Graphic Mode Support Table
22. Appendix II – RS-232 control protocols
24. Appendix III – Mapping definition
26. Warranty, Caution & Limitation of Liability, Trademarks
27. Contact details
It is essential that these instructions are read and understood before connecting or
powering up this controller.

Summary

INSTRUCTIONS

Introduction

System Design

Diagram illustrating a typical LCD display system configuration.

Assembly Notes

Connection & Operation

PC Settings

Optimizing PC graphics performance for the display system.

LCD Display System Settings

OSD Functions

Explanation of OSD functions like input selection, brightness, and color.

Connectors, Pinouts & Jumpers

Jumpers Setting

Summary of jumper settings for panel voltage and control.

DIP Switch Selection

Controller Dimensions

Application Notes

Inverter Connection

Considerations for connecting the backlight inverter.

Troubleshooting

Specifications

Appendix I - Graphic Mode Support Table

Appendix II - RS-232 Control Protocols

RS-232 Serial Control

Physical connection and software control for RS-232 communication.

Appendix III - Mapping Definition

Definition of Mapping A

Timing diagram for LVDS data mapping configuration A.

Definition of Mapping B

Timing diagram for LVDS data mapping configuration B.

Warranty

Caution

Limitation of Liability

Trademarks

Contact Details

digitalview HE-1400 Specifications

General

Brand	digitalview
Model	HE-1400
Category	Controller
Language	English