AC Power
The RP100 Artist can also be powered with the included PS0913B power supply. Once the audio
connections have been made, turn the RP100 Artist’s Master Level (far right knob) all the way
down. Connect the plug of the PS0913B power supply to the power jack on the rear panel of
the RP100 Artist. Connect the other end of the PS0913B power supply to an AC outlet.Turn the
power of your amplifier(s) to the on position and adjust the volume(s)to a normal playing level.
Gradually increase the RP100 Artist Master Level to achieve the desired volume.
9
To Next Page
Loading...
