40
Factory Reset
This function resets the RP250 to its original factory settings. This procedure erases all custom
User presets, and recalibrates the Expression Pedal.
ATTENTION: Performing this function will erase all user-programmed data. All
such data will be lost forever! Be sure you want to erase the memory and start fresh
before continuing with this procedure.
The procedure for performing a Factory Reset is as follows:
1. Press and hold the Store button while powering up the RP250.
2. When the display prompts you with , release the Store button, which is now flashing.
3. Press and hold the flashing Store button for 3 seconds until appears in the display and
release (The Factory Reset procedure takes approximately 20 seconds). The Expression Pedal
calibration procedure now commences.
To Next Page
Loading...
