DigiTech RP90 User Manual

13
Getting Started
Making Connections
There are several different connection options available with the RP90. Before connecting the
RP90, make sure that the power to your amplifier and the RP90 is turned off. There is no power
switch on the RP90. To turn the RP90 on or off, connect or disconnect the included PS200R
power supply from the Power Input jack.
Mono Operation - Amplifier
Connect your guitar to the Input of the RP90. Connect a single mono instrument cable from the
Left (Mono) output of the RP90 to the instrument input or effect return on your amplifier. Set
the Amp/Mixer switch to Amp.
Guitar Amp Input/
Effect Return
Left (Mono)
Output
Input
Amp/Mixer
switch set to
Amp.
NOTE: When using a
guitar amp, it may be best to
connect the Output of the
RP90 to the effect return of
the amplifier.

DigiTech RP90 Specifications

General

Brand	DigiTech
Model	RP90
Category	Computer Hardware
Language	English