Owner's Manual
52
• GENDER (-50-+50)
This parameter is used to make the pitch shifted signal sound more male or
female, with -50 representing male and 50 representing female. Note that this
parameter is not affected by the FX LVL parameter.
• SHIFT (-12-+12)
This parameter determines the amount of transposition applied to the input
signal, with negative numbers representing downward pitch transposition and
positive numbers representing upward pitch transposition. Note that this
parameter is not affected by the FX LVL parameter.
To dial in Pitch FX:
1. Press and hold the <PITCH FX> button to edit the effect.
2. Sing into the microphone (or use the Sound Check feature, see "Sound Check"
on page 18
) and raise the FX LVL parameter so you can hear the effect.
3. Select the desired pitch effect TYPE using the <DATA> encoder.
4. Select the desired KEY option. If you want the KEY to follow chromatic scaling,
select the "Chromatic" option. If you want the KEY to be set the same as the
Harmony KEY, set the Pitch FX KEY to the "Harmony" setting. If you want
the Pitch FX KEY to adapt as the music changes, enable the adaptive "PITCH"
feature in the Live Adapt menu. For information on using Live Adapt, see "Live
Adapt™" on page 19
.
5. Adjust the GENDER parameter to see if it gets you closer to the sound you are
after. If it doesn't, leave it at 0.
6. Adjust the SHIFT parameter if you wish to transpose the signal up or down.
7. Fine-tune the FX LVL parameter until the desired effect level is achieved. Note
that the GENDER and SHIFT portions of the effect will not be affected by the
FX LVL parameter.
To Next Page
Loading...
Need help?
General
