DIGITEN DTC-102 - Features; Technical Specifications

- 1 -
The DTC-102 Thermostat is dual-stage, digital temperature controller. The large, lighted LCD screen display is easy to
read. The case is designed with fireproof ABS material for human engineering. Temperature sensor is waterproof with
high quality, high-accuracy.
Features
•Large LCD screen;
•Dual relay output, be able to control heating and refrigeration equipment at the same time;
•Support reading with Centigrade or Fahrenheit unit;
•Maximum output load: 1100W@110V,2200W@220V;
•Easy to use and program, plug and play device;
•With a temperature correction function;
•Delay starting protection for refrigerating compressor;
•High and low temperature alarms are available；
•Over-temperature and sensor fault alarm
•Heating/Cooling return difference could be set separately for refrigeration and heating to protect temperature controller from
violent change;
•Could use heating or cooling function separately.
Technical specifications
Temperature Control Range
-40-120℃, -40-248℉
Temperature Resolution
0.1°C,0.1℉
Temperature Accuracy
± 1℃, 1℉
Temperature Control Mode
Heating and Cooling
Input Power
100-240VAC, 50/60HZ
Temperature Control Output
Max.10A, 100-240VAC
Buzzer Alarm
High and Low Temperature Alarm
Sensor Type
Waterproof NTC sensor (Including)
Sensor Length
2m, 6ft
Relay Contact Capacity
Heating (10A, 100-240VAC)
Cooling (10A, 100-240WC)
Input Power Cable Length
120 cm/4ft
Output Power Cable Length
30cm/6.5"
Note: The waterproof temperature sensor works with water, saltwater, weak acid or weak base liquid.