Digitronic Digitaler Schaltbeschleuniger
Automationsanlagen GmbH DIGISPEED DS1/V2
7. Terminal allocartion
Terminal1 = input 1
Terminal2 = input 2
Terminal3 = configuration 1 (input 3)
Terminal4 = configuration 2 (input 4)
Terminal5 = 0V for inputs
Terminal6 = 0V for supply voltage
Terminal7 = output 1
Terminal8 = output 2
Terminal9 = +24V DC ±20% supply voltage(a minimum of 5.0 Amp.)
Terminal10 = Do not connect!(for the internal condensors discharging only)
8. Examples for connection
Note:
The picture shows an DIGISPEED DS1/V2, set to 5ms over-energizing time without galvanical
separation at an S5-PLC.
Ausgabe: August 04 Seite: 13
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:hvssystem@hvssystem.com
Site web : www.hvssystem.com
To Next Page
Loading...