42
1.Log into your NetWare file server as a Supervisor (Admin.) or equivalent.
2. Select NetWare and type in the Print server that created during PCONSOLE Select
the NetWare File Server to which the print server device will be attached.
3.Click Setup, it then appears the sub-menu.
4.Click NetWare, it then as shown in the following picture.
Print Server Name:
This option allows you to input print server name which configured by PSAdmin
utility or PCOMSOLE program.
Polling Time:
The time interval in which the print server unit polls the file server for servicing
of print queues.
Logon Password:
This option allows you to input encrypted password from the print server. The
print server login to NetWare server that administrator set password from
selected print server.
Use NDS Mode:
To Next Page
Loading...
