28
The descriptions of these items are listed below:
Item Description
Wireless
Connection
You can enable or disable wireless
functionality here.
Please note: You can switch wireless network
off, but you can’t switch wired Ethernet off.
Network Type Select the type of network you wish to
connect: Infra (infrastructure: wireless access
point) or Ad Hoc (point to point wireless
connection).
Mode Select the wireless operating mode:
B (802.11b, maximum 11mbps)
G (802.11g, maximum 54mbps)
N (802.11n, maximum 150mbps).
You can select mixed mode (2.4GHz B+G+N)
so IP camera will work with all kinds of
wireless network. If you select B, G, or N only,
then IP camera will be able to communicate
with wireless network of same operating
mode only.
Band Select wireless band: 20MHz only or
20/40MHz auto switch. It’s recommended to
select ‘Auto 20/40MHz’.
Available
Networks
IP camera will list all nearby networks and
their parameter in this field. If the network you
wish to connect does not appear hear, click
‘Refresh’ to rescan again. You can click
‘Refresh’ button for many times until the
network you wish to connect appear in the
list.
If you wish to connect to a specific network,
select the radio button of the network you
wish to connect (under ‘Connect’ field), and
To Next Page
Loading...
