29
the network’s connection parameter will
appear in the fields below.
Tips: If you can’t see the network you wish to
connect after you click ‘Refresh’ button for
many times, please move IP camera closer to
the network’s access point).
SSID Input network’s SSID (access point’s wireless
name) here, or select one network from
network list above.
If he network you wish to connect is a ‘hidden’
network (SSID is hidden to the public), you
have to input SSID manually.
Channel Select wireless channel number. Use ‘Auto’ to
select channel automatically.
Authentication Select authentication type:
None: no encryption
WEP: use WEP encryption
WPA-PSK: Use WPA with PSK encryption.
WPA2-PSK: Use WPA2 with PSK encryption.
The authentication type you selected here
must be identical with the setting of access
point.
Encryption Type Select wireless encryption type. This option
will vary depends on the authentication type
of the network you wish to connect.
The encryption type you selected here must
be identical with the setting of access point.
To Next Page
Loading...
