11
Step2: In the live page, click “Config.” or “Configuration” to open the configuration page.
Note: Different camera models might have different live view and configuration
pages. The figures below are just examples and may look different from the
ones in your hand.
Step3: Click “Network” “DDNS”, and check “DDNS Enable”.
Step4: Select “default”, or the host name you applied for a DDNS service in “System
Name” (ex. dyndns).
When “default” is available to choose
In “Hostname”, keep the default value, i.e. the MAC address of this camera, or
change the name to a meaningful one. It’s easier to memorize.
Then, note down the whole address of the camera, for example,
MAC000E530D93E3.ddns.dvrtw.com.tw.
To Next Page
Loading...
Need help?
General
