Digitus DN-170093 - Page 32

26
07
Bypass voltage upper limit
setting
•
Press Enter button to
change the setting (The
bypass voltage upper
limit range is 230 –
264Vac).
•
Press UP button ▲ to
select the previous
setting.
•
Press DOWN button ▼
to select the next
setting.
08
Bypass voltage lower limit
setting
•
Press Enter button to
change the setting (The
bypass voltage lower
limit range is 170 -
220Vac).
•
Press UP button ▲ to
select the previous
setting.
•
Press DOWN button ▼
to select the next
setting.
09
Mute setting
•
Press Enter button to
change thesetting (ON
or OFF).
•
Press UP button ▲ to
select the previous
setting.
•
Press DOWN button ▼
to save and exit the
setup.
10
BYPASS enable/disable
setting
•
Press Enter button to
change thesetting (ON
or OFF).
•
Press UP button ▲ to
select the previous
setting.
•
Press DOWN button ▼
to save and exit the
setup.