16
6.2 Installation Environment
Before installation, make sure that the proper working environment
is available, including power requirements, adequate space,
proximity to other equipment to be connected, and other equipment
in place. Please confirm the following installation requirements:
Ensure the stability of the workbench and good grounding
Check whether cables and connectors required for installation
are in place (less than 100m)
The product does not provide installation components. Prepare
components of the selected installation type, such as screws,
nuts, and tools, to ensure reliable installation
Power supply: 48V to 57V DC (DN-651139)
12V to 55V DC (DN-651145)
Environment: operating temperature: -40°C to 75 °C relative
humidity: 5% to 95%.
6.3 Installation
DIN-Rail Installation
The 45mm standard DIN-Rail installation is very convenient for most
industrial applications. The installation steps are as follows:
Check whether the installation accessories of DIN-Rail guide
tools are available (installation accessories are provided for this
product).
Check whether DIN-Rail is firmly fixed, whether there is a
suitable place to install the product.
Clamp the lower part of the DIN-Rail connecting seat of the
product accessories into the DIN-Rail (lower part with spring
support), and then clamp the upper part of the connecting seat
into the DIN-Rail (lower part clamp a little, slightly force to keep
the balance of the equipment stuck into the upper part).
To Next Page
Loading...
