Digitus DS-12860 Quick Installation Guide

12
Chapter 2
Hardware installation
Cable connection and installation
KVM switches can be placed on any suitable surface, and is sufficient to safely
support the weight of the device plus the additional cable; clean and make sure
that no other plane debris would affect the switch ventilation and normal operation.
To install For a 2 or 4 port desktop KVM device, follow these steps:
1. Plug the USB keyboard and USB mouse into the USB console port on the rear
panel of the device.
2. Plug display minotors into the console video port on the rear panel of the
device.
3. If you use a separate speaker and microphone, plug it into the console analog
audio port on the rear panel of the device.
4. With a custom KVM cable set, The KVM cable connector and the
included USB connector are plugged into the corresponding jacks on the rear
panel of the switch.
5. Put the other end of the cable, video and plug the USB cable into the
corresponding USB and graphics video interface on your computer.
6. Insert the USB peripheral into the Type A jack (one on the front panel; the
other two on the rear panel)
7. Turn on the monitor.
8. KVM is powered by computer USB port. To turn on computer to activate
KVM switch.
9. For external power supply, which is optional. Please use DC 9V power supply
Note: DC 5V for DS-12882 and DC connector plug size : 5.5x2.1mm.
10. Turn on your computer.

Digitus DS-12860 Specifications

General

DC-in jack	Yes
HDMI version	1.4b
Console ports	USB A
USB connector type	USB Type-A, USB Type-B
HDMI ports quantity	6
Number of computers controlled	2
Video bandwidth	30 Hz
Maximum resolution	3840 x 2160 pixels
Cables included	HDMI, KVM
Product color	Black
Rack mounting	No
LED indicators	Status
Housing material	Metal
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 80 °C
Operating relative humidity (H-H)	0 - 80 %
Country of origin	China
Harmonized System (HS) code	85176200

Weight and Dimensions

Depth	92 mm
Width	132 mm
Height	66 mm
Weight	575 g