14
Chapter 4
Keyboard operation
Overview
The KVM product in this desktop series offers a large number of easy hotkey
operations, making it easy to set up KVM via the keyboard or to complete port
switching.
Hotkey setting:
This series of products provides 4 combinations of hotkeys for user selection and
setting. The default hotkey is “LEFT” [ CTRL ] [ CTRL ] to switch to the next online
port, [ CTRL ] + [ SHIFT ] [ 1 ] or [ 2 ] Switch to the specified port. The following table
is a description of the four hotkey combinations, please check the settings when
using the user:
1. [ CTRL ] + [ SHIFT ] mode
CTRL ] [ CTRL ]
Press twice to switch to the next device
online port
CTRL ] + [ SHIFT ] [ 1 ] oder [ 2 ]
Switch to the computer corresponding
to the port of [ 1 ] [ 2 ]
[ CTRL ] + [ SHIFT ] [→] or [ ↓ ]
Switch to the next computer
[ CTRL ] + [ SHIFT ] [ ←] or [ ↑ ]
Switch to the previous computer
[ CTRL ] + [ SHIFT ] [ B ]
CTRL ] + [ SHIFT ] [ S ]
Automatic switching mode, the default
is 5seconds, press [ ESC ] to exit
CTRL ] + [ SHIFT ] [ S ] [ N ]
Set the automatic switching mode
interval, press [ ESC ] to exit
CTRL ] + [ SHIFT ] [SCROLL ]
Switch to [ SCROLL ] + [ SCROLL ]
hotkey combination mode
CTRL ] + [ SHIFT ] [ Num ]
Switch to [ NUM ] + [ NUM ] hotkey
combination mode
CTRL ] + [ SHIFT ] [CAPS ]
Switch to [ CAPS ] + [ CAPS ] hotkey
combination mode