2
User consideration
The manufacturer has the right to modify and change the information, documents
and specifications contained in the QIG without prior notice. If the software program
is found to be defective after purchase, the purchaser will be responsible for all
necessary services, repairs and any accidental or consequential damages caused by
the software.
The manufacturer is not responsible for any unauthorized adjustments to the radio
and / or television interference caused by this equipment, and the user must correct
the interference. If the operating voltage setting is not correctly selected before
operation, the manufacturer will not be liable for any damage caused.
Be sure to confirm that the voltage is set correctly before use. This product does
not have a power supply. If the power supply is required in a special environment,
the customer can configure it according to the product power interface (power
supply socket specification 5.5mm*2.1mm) and the power socket printing
parameters.
Package Contents
The multi-computer KVM switch package includes the following:
DS-12860
1 x KVM Switch, 2-Port, Dual Display, 4K, HDMI®
2 x HMDI® cable
2 x KVM cable (HDMI, USB, Audio)
1 x QIG
DS-12883
1 x KVM Switch, 4-Port, Dual Display, 4K, HDMI®
4 x HMDI® cable
4 x KVM cable (HDMI, USB, Audio)
1 x QIG
DS-12862
1 x KVM Switch, 2-Port, Dual Display, 4K, DisplayPort®
2 x DisplayPort® cable
2 x KVM cable (DisplayPort, USB, Audio)
1 x QIG