Digium, Inc. Page 44
Chapter 3: Configuration
Advanced SIP Settings
This section provides the ability to add and modify advanced SIP settings.
These settings are for experienced administrators only. Please take care
when modifying any of these settings. The default values should be
sufficient for most applications. Included are the following sections.
Networking - General, NAT, RTP, RTCP, and DTMF settings
Parsing and Compatibility - General, SIP methods, Caller ID, timer
configuration, and outbound registrations
Security - SIP domains and authentication settings
Media - ISDN media, QOS/TOS settings
Fax - Fax related settings
T1/E1
This section provides the ability to configure the T1/E1 hardware in the
Gateway Series appliance. Included are the following sections.
General - General options for T1/E1 configuration
Port # - Port specific options for interface type and signaling
Call Routing Groups
This section provides the ability to add and modify SIP and T1/E1 call
routing groups. A call routing group allows a group of channels to be
addressed when creating a call routing rule.
To Next Page
Loading...
