EasyManua.ls Logo

Digium G100 User Manual

Digium G100
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Gateway Series
G100 / G200
Administrator Manual
601-00020 Rev. A1
Question and Answer IconNeed help?

Do you have a question about the Digium G100 and is the answer not in the manual?

Digium G100 Specifications

General IconGeneral
Weight1.5 lbs
Humidity10% to 90% non-condensing
Ports2 FXS ports, 2 FXO ports
Network Interface10/100 Mbps Ethernet
Power Supply12V DC, 1A
ProtocolsSIP
T1/E1 Ports1
Operating Temperature0 to 40 °C

Summary

Safety Certification and Agency Approvals

Safety Standards

Lists safety standards such as UL, CSA, IEC, EN, and AS/NZS for the device.

Other Approvals

Lists other regulatory approvals including CE Mark and RoHS.

EMC Compliance

Details electromagnetic compatibility standards like FCC and Industry Canada.

Important Safety Instructions

Servicing, Batteries, and Environmental Hazards

Precautions for unit servicing, batteries, water, heat, and electrical safety.

Chapter 1 Overview

Echo-Cancellation Functionality

Explains the function and importance of echo cancellation in the Gateway Series.

Chapter 2 Unit Installation

Installation Basics

Covers unpacking, inspection, and identification procedures for the appliance.

Hardware Installation and Mounting

Details physical installation, grounding, and various mounting methods.

Network Connectivity and IP Setup

Guides on connecting to the network and configuring IP settings.

Chapter 3 Configuration

General and Specific Settings

Covers SIP/TDM settings, routing, administrators, and networking.

System Monitoring and Maintenance

Details logging, reporting, diagnostics, and maintenance tasks.

Chapter 4 Troubleshooting

Firmware Recovery and Reset Procedures

Instructions for restoring the appliance via USB.

FAQs and Support

Answers common questions and provides support contact details.

Related product manuals