What to do if my Diloc Air Conditioner does not work?
If your Diloc Air Conditioner isn't working, first, ensure the unit is plugged in and the socket is functioning correctly. Also, the unit should be used with a room temperature between 7 and 35°C. Finally, in cooling mode, check if the room temperature is lower than the desired temperature; in heating mode, verify if it's higher, and adjust the desired room temperature accordingly.
Why is the cooling or heating effect poor in my Diloc Air Conditioner?
Poor cooling or heating in your Diloc Air Conditioner can occur due to several reasons: * Open doors or windows, too many people in the room, or heat sources (like fridges) in cooling mode. To solve this, close doors and windows and increase the air conditioning power. * A dirty filter screen. Clean or replace the filter screen. * A blocked air inlet or outlet. Clear any obstructions and ensure the unit is installed according to instructions.
What to do if my Diloc Air Conditioner is leaking?
If your Diloc Air Conditioner is leaking, it could be due to the unit not being level. Use a spirit level to check if it's horizontal; if not, remove it from the wall and straighten it. Another cause could be a blocked drain pipe. Inspect the drain pipe to ensure it is not blocked or constricted.
General| Brand | Diloc |
|---|---|
| Model | D.EASYDESIGN 10SF |
| Category | Air Conditioner |
| Language | English |
To Next Page
