Need help?Do you have a question about the Dimplex Clova CLV20B and is the answer not in the manual?
General| Flame Brightness Adjustment | Yes |
|---|---|
| Thermostat | Yes |
| Overheat Protection | Yes |
| Cool-to-Touch Exterior | Yes |
| Color | Black |
| Model | Clova CLV20B |
| Type | Electric Fireplace |
| Heat Settings | 2 |
| Controls | Remote Control |
Do not use heater near baths, showers, swimming pools, or outdoors.
Do not locate heater directly above or below sockets/connection boxes.
Never cover or obstruct the heat outlet grille to prevent overheating.
Position the supply cord on the right, away from the heat outlet.
Avoid external switching devices like timers to prevent thermal cut-out issues.
Use with caution in small rooms if occupants cannot leave independently.
Unpack carefully and retain packaging for future use or returns.
The flame effect can be used with or without heating, requiring minimal electricity.
A subtle sound from the flame effect is normal in quiet environments.
This appliance must be properly earthed for safety.
Only use with an AC supply voltage matching the heater's rating.
Do not switch on the appliance until it is properly installed.
Securely fix to wall using supplied plugs/screws for block walls or special fasteners for studded walls.
Three switches control power, flame effect, and heat output (1kW or 2kW).
Replace defective lamps with a 60W E14 SES Clear Candle lamp.
Disconnect power before cleaning; use soft cloths, no abrasives or proprietary glass cleaners.
Do not dispose of with household waste; recycle where facilities exist.
Contact supplier or warranty leaflet for after sales service and support.
To Next Page